Teac TN-5BB-M/B Turntable

Teac TN-5BB-M/B Turntable

The Teac TN-5BB-M/B is a semi-automatic belt-drive turntable with a SAEC tonearm and a factory-mounted Ortofon 2M Red cartridge.

Housing

The housing has a multi-layer construction: a 36 mm MDF base plate and a 12 mm plate of synthetic marble. The housing weighs 8.8 kg. The tonearm and platter are mounted on the synthetic marble top plate, while the motor sits on the MDF base plate. These separate structures isolate the tonearm and motor from each other and reduce the transfer of vibrations. Japanese washi paper is used as a spacer between the synthetic marble and the MDF.

Drive

The TN-5BB uses a flat belt that transfers the force of the DC motor to the outer edge of the platter. An optical sensor on the underside of the platter detects the rotation speed; a servo mechanism adjusts the motor accordingly. This Platter Rotation Sensing Servo System (PRS3) provides high rotational accuracy.

• Speeds: 33 ⅓, 45 and 78 rpm
• Wow & flutter: ≤ 0.1 %

Platter

The platter is made of 20 mm acrylic with a diameter of 30 cm and a weight of 1.7 kg. Acrylic and the polyvinyl material of records sit close together in the triboelectric series, which makes electrostatic charging less likely on direct contact. Records can be placed directly on the platter without a mat.

Tonearm

The knife-edge tonearm was developed in cooperation with SAEC. The vertically moving section uses a stainless steel knife edge, while the laterally moving section rests on Japanese ball bearings at two points. The height of the tonearm base is adjustable; the Vertical Tracking Angle (VTA) can be set within a range of 6 mm. The tonearm geometry follows the IEC-recommended Baerwald alignment. The internal wiring uses a cable with a PC-Triple-C conductor from SAEC.

• Effective tonearm length: 223 mm
• Cartridge overhang: 18 mm
• Anti-skating: present

Arm Lifter

A motorised arm lifter raises and lowers the arm at the press of a button. After playback ends, a contactless optical sensor lifts the arm automatically. This function can be switched off for non-standard records.

Cartridge

An Ortofon 2M Red MM cartridge is included, already installed and aligned to the headshell.

• Cartridge type: MM
• Output: 5.5 mV (1 kHz, 5 cm/s)
• Tracking force: 1.8 g
• Cartridge weight: 7.2 g (with headshell 10 g)
• Recommended cartridge weight: 4–13 g (incl. headshell 14–23 g)

Connections

The analog output offers both RCA and XLR sockets. The XLR output is designed for balanced MC transmission and can be connected to external phono stages such as the PE-505.

Technical Data

• Type: semi-automatic
• Drive: belt drive
• Built-in preamplifier: no
• Power consumption: 2 W (standby 0.3 W)
• Weight: 14.0 kg

Scope of Delivery

• Turntable with platter
• Headshell with installed Ortofon 2M Red
• Counterweight
• 45 rpm adapter
• Flat belt
• Pulley cover
• Dust cover
• 2 hinges
• 4 washers for foot height adjustment
• Allen key for arm height adjustment
• RCA audio cable
• Grounding cable
• AC adapter (GPE018S-120100-Z)
• Cartridge alignment gauge
• User manual

Delivery Time:
The delivery time is shown on the product page / in the listing.

2-Year Manufacturer Warranty:
This product comes with a 2-year manufacturer warranty. Depending on the manufacturer, a longer warranty period may apply — please refer to the manufacturer's terms for details.

14-Day Return Policy:
If the product arrives damaged due to the shipping company, Audio Everywhere will cover the return shipping costs.

Teac TN-5BB-M/B Turntable

The Teac TN-5BB-M/B is a semi-automatic belt-drive turntable with a SAEC tonearm and a factory-mounted Ortofon 2M Red cartridge.

Housing

The housing has a multi-layer construction: a 36 mm MDF base plate and a 12 mm plate of synthetic marble. The housing weighs 8.8 kg. The tonearm and platter are mounted on the synthetic marble top plate, while the motor sits on the MDF base plate. These separate structures isolate the tonearm and motor from each other and reduce the transfer of vibrations. Japanese washi paper is used as a spacer between the synthetic marble and the MDF.

Drive

The TN-5BB uses a flat belt that transfers the force of the DC motor to the outer edge of the platter. An optical sensor on the underside of the platter detects the rotation speed; a servo mechanism adjusts the motor accordingly. This Platter Rotation Sensing Servo System (PRS3) provides high rotational accuracy.

• Speeds: 33 ⅓, 45 and 78 rpm
• Wow & flutter: ≤ 0.1 %

Platter

The platter is made of 20 mm acrylic with a diameter of 30 cm and a weight of 1.7 kg. Acrylic and the polyvinyl material of records sit close together in the triboelectric series, which makes electrostatic charging less likely on direct contact. Records can be placed directly on the platter without a mat.

Tonearm

The knife-edge tonearm was developed in cooperation with SAEC. The vertically moving section uses a stainless steel knife edge, while the laterally moving section rests on Japanese ball bearings at two points. The height of the tonearm base is adjustable; the Vertical Tracking Angle (VTA) can be set within a range of 6 mm. The tonearm geometry follows the IEC-recommended Baerwald alignment. The internal wiring uses a cable with a PC-Triple-C conductor from SAEC.

• Effective tonearm length: 223 mm
• Cartridge overhang: 18 mm
• Anti-skating: present

Arm Lifter

A motorised arm lifter raises and lowers the arm at the press of a button. After playback ends, a contactless optical sensor lifts the arm automatically. This function can be switched off for non-standard records.

Cartridge

An Ortofon 2M Red MM cartridge is included, already installed and aligned to the headshell.

• Cartridge type: MM
• Output: 5.5 mV (1 kHz, 5 cm/s)
• Tracking force: 1.8 g
• Cartridge weight: 7.2 g (with headshell 10 g)
• Recommended cartridge weight: 4–13 g (incl. headshell 14–23 g)

Connections

The analog output offers both RCA and XLR sockets. The XLR output is designed for balanced MC transmission and can be connected to external phono stages such as the PE-505.

Technical Data

• Type: semi-automatic
• Drive: belt drive
• Built-in preamplifier: no
• Power consumption: 2 W (standby 0.3 W)
• Weight: 14.0 kg

Scope of Delivery

• Turntable with platter
• Headshell with installed Ortofon 2M Red
• Counterweight
• 45 rpm adapter
• Flat belt
• Pulley cover
• Dust cover
• 2 hinges
• 4 washers for foot height adjustment
• Allen key for arm height adjustment
• RCA audio cable
• Grounding cable
• AC adapter (GPE018S-120100-Z)
• Cartridge alignment gauge
• User manual

Delivery Time:
The delivery time is shown on the product page / in the listing.

2-Year Manufacturer Warranty:
This product comes with a 2-year manufacturer warranty. Depending on the manufacturer, a longer warranty period may apply — please refer to the manufacturer's terms for details.

14-Day Return Policy:
If the product arrives damaged due to the shipping company, Audio Everywhere will cover the return shipping costs.

Delivery time

Right above the "Add to cart" button you'll see your personal delivery window — calculated automatically and continuously updated.

Shipping costs

• Germany: free shipping from €250
• EU-wide: free shipping from €350
• Switzerland, Norway, United Kingdom: free shipping from €1,000

Deliveries outside the EU

For deliveries outside the EU, German VAT is deducted from the displayed price — you pay the net price. Please note: additional costs may arise in the destination country, e.g. import duties, import taxes or local charges. These costs are beyond our control and are borne by the buyer.

Returns

Audio Everywhere offers a 14-day return policy. If the package arrives damaged, we cover the return shipping costs. For questions about returns, you can reach us by email, WhatsApp or phone — please include your order number.

For details on warranty and guarantee, please refer to the respective product description.

Taxes and pricing according to German VAT law (UStG)

Consumers in Germany and the EU

All prices include the applicable VAT according to § 1 para. 1 in conjunction with § 12 UStG. Taxation within the EU follows the One-Stop-Shop procedure under § 18j UStG. The VAT rate of the respective destination country applies.

Deliveries to third countries (outside the EU)

Deliveries outside the EU are VAT-exempt according to § 4 no. 1a UStG in conjunction with § 6 UStG. German VAT is deducted from the displayed price — you pay the net price. Please note: additional costs may arise in the destination country, in particular import duties, import taxes or local charges. These are beyond our control and are borne by the buyer.

Used products (margin scheme)

For used products we apply the margin scheme according to § 25a UStG. In this case, no VAT is shown.

B-stock

B-stock items do not fall under the margin scheme. Regular VAT applies to B-stock and is shown accordingly.

Safety information — Audio Everywhere

These notes apply to all HiFi devices and accessories sold by us.

Electronic devices (amplifiers, streamers, CD players, turntables)

Operate only in dry, enclosed indoor spaces. Avoid moisture, direct sunlight and extreme temperatures. Use only the specified mains voltage — do not overload power strips. Do not switch on devices with damaged cables or housings. Keep ventilation slots clear: at least 10 cm distance from walls and other devices. Place stably and securely — no open liquid containers nearby. Keep out of reach of children and pets.

Speakers

Place on a stable surface or suitable stands. No moisture, no direct sunlight. Operate only with matching amplifiers and correctly polarised cables. Do not use as a storage surface. Keep out of reach of children and pets.

Cables (speaker cables, RCA, power cables)

Use only for the intended purpose. Always pull by the plug, never by the cable. Avoid kinks, sharp edges and pressure from heavy objects. Replace visibly damaged cables immediately. Keep out of reach of children and pets.

Accessories (adapters, mounts, cleaning agents, styli, headshells)

Use only according to the manufacturer's instructions. No aggressive cleaning agents, no damp environments. Store small parts safely due to choking hazard. Mount accessories correctly to avoid damage or malfunction.

General notes

Read the operating instructions before use. No unauthorised repairs or opening of devices. Always contact a specialist service for technical problems. We are happy to answer any questions about safe use at any time.