Teac TN-4D-SE Direct-Drive Turntable

Teac TN-4D-SE Direct-Drive Turntable

The Teac TN-4D-SE is a manual direct-drive turntable. It ships with a pre-installed SUMIKO Oyster MM cartridge and includes a switchable phono preamplifier.

Drive and Platter

A brushless DC motor with feedback control maintains speed stability. The platter is made of die-cast aluminium and measures 30 cm. Wow and flutter are rated at ≤ 0.1 %.

Tonearm

The S-shaped tonearm was developed in cooperation with the SAEC Corporation and uses a knife-edge bearing. The effective tonearm length is 223 mm. The tonearm features a counterweight for tracking-force adjustment and an anti-skating mechanism. The universal headshell mount allows cartridges to be swapped and supports cartridge weights from 14 to 23 g (including headshell).

Phono Preamplifier

The built-in PHONO EQ amplifier is designed for MM cartridges and can be switched between PHONO and LINE. The phono stage uses the NJM8080 operational amplifier from the New Japan Radio Corporation. This allows the turntable to be connected directly to line-level inputs.

Construction

The plinth is made of high-density MDF. The feet consist of a machined aluminium shell with a rubber pad and provide shock absorption. The start and speed-selection dial is made of machined aluminium.

Features

• Manual direct-drive turntable
• Brushless DC motor with feedback control
• Die-cast aluminium platter, 30 cm
• S-shaped tonearm with knife-edge bearing (developed with SAEC)
• Piano-lacquer or walnut veneer finish
• Built-in PHONO EQ amplifier, PHONO/LINE switchable
• NJM8080 operational amplifier in the phono stage
• Two speeds: 33-⅓ and 45 rpm
• Gold-plated, oxidation-resistant output connectors
• SUMIKO Oyster MM cartridge
• Shock-absorbing isolation feet
• GND terminal
• RoHS compliant

Specifications

• Drive type: direct drive
• Speeds: 33 rpm, 45 rpm
• Wow & flutter: ≤ 0.1 %
• Signal-to-noise ratio: 67 dB
• Cartridge: SUMIKO Oyster (MM)
• Cartridge output: 4.0 mV (1 kHz)
• Tracking force: 2.3 g
• Cartridge weight: 5.3 g
• Headshell included: 15.3 g
• Recommended cartridge weight: 4–13 g (excluding headshell), 14–23 g (including headshell)
• Outputs: RCA
• Output level: Phono 4.0 mV (1 kHz), Line 224 mV (–13 dBV)
• Anti-skating: yes
• Platter: die-cast aluminium, 30 cm
• Effective tonearm length: 223 mm
• Power consumption: 2 W (standby 0.5 W)
• Dimensions (H × W × D): 11.7 × 42 × 35.6 cm
• Weight: 6.1 kg

Included Accessories

• Felt mat
• EP adapter
• Counterweight
• Headshell (with SUMIKO Oyster installed)
• Platter
• Dust cover
• Hinges × 2
• RCA audio cable with GND connector
• Power adapter (GPE036W-24015)
• User manual including warranty card

Delivery Time:
The delivery time is shown on the product page / in the listing.

2-Year Manufacturer Warranty:
This product comes with a 2-year manufacturer warranty. Depending on the manufacturer, a longer warranty period may apply — please refer to the manufacturer's terms for details.

14-Day Return Policy:
If the product arrives damaged due to the shipping company, Audio Everywhere will cover the return shipping costs.

Teac TN-4D-SE Direct-Drive Turntable

The Teac TN-4D-SE is a manual direct-drive turntable. It ships with a pre-installed SUMIKO Oyster MM cartridge and includes a switchable phono preamplifier.

Drive and Platter

A brushless DC motor with feedback control maintains speed stability. The platter is made of die-cast aluminium and measures 30 cm. Wow and flutter are rated at ≤ 0.1 %.

Tonearm

The S-shaped tonearm was developed in cooperation with the SAEC Corporation and uses a knife-edge bearing. The effective tonearm length is 223 mm. The tonearm features a counterweight for tracking-force adjustment and an anti-skating mechanism. The universal headshell mount allows cartridges to be swapped and supports cartridge weights from 14 to 23 g (including headshell).

Phono Preamplifier

The built-in PHONO EQ amplifier is designed for MM cartridges and can be switched between PHONO and LINE. The phono stage uses the NJM8080 operational amplifier from the New Japan Radio Corporation. This allows the turntable to be connected directly to line-level inputs.

Construction

The plinth is made of high-density MDF. The feet consist of a machined aluminium shell with a rubber pad and provide shock absorption. The start and speed-selection dial is made of machined aluminium.

Features

• Manual direct-drive turntable
• Brushless DC motor with feedback control
• Die-cast aluminium platter, 30 cm
• S-shaped tonearm with knife-edge bearing (developed with SAEC)
• Piano-lacquer or walnut veneer finish
• Built-in PHONO EQ amplifier, PHONO/LINE switchable
• NJM8080 operational amplifier in the phono stage
• Two speeds: 33-⅓ and 45 rpm
• Gold-plated, oxidation-resistant output connectors
• SUMIKO Oyster MM cartridge
• Shock-absorbing isolation feet
• GND terminal
• RoHS compliant

Specifications

• Drive type: direct drive
• Speeds: 33 rpm, 45 rpm
• Wow & flutter: ≤ 0.1 %
• Signal-to-noise ratio: 67 dB
• Cartridge: SUMIKO Oyster (MM)
• Cartridge output: 4.0 mV (1 kHz)
• Tracking force: 2.3 g
• Cartridge weight: 5.3 g
• Headshell included: 15.3 g
• Recommended cartridge weight: 4–13 g (excluding headshell), 14–23 g (including headshell)
• Outputs: RCA
• Output level: Phono 4.0 mV (1 kHz), Line 224 mV (–13 dBV)
• Anti-skating: yes
• Platter: die-cast aluminium, 30 cm
• Effective tonearm length: 223 mm
• Power consumption: 2 W (standby 0.5 W)
• Dimensions (H × W × D): 11.7 × 42 × 35.6 cm
• Weight: 6.1 kg

Included Accessories

• Felt mat
• EP adapter
• Counterweight
• Headshell (with SUMIKO Oyster installed)
• Platter
• Dust cover
• Hinges × 2
• RCA audio cable with GND connector
• Power adapter (GPE036W-24015)
• User manual including warranty card

Delivery Time:
The delivery time is shown on the product page / in the listing.

2-Year Manufacturer Warranty:
This product comes with a 2-year manufacturer warranty. Depending on the manufacturer, a longer warranty period may apply — please refer to the manufacturer's terms for details.

14-Day Return Policy:
If the product arrives damaged due to the shipping company, Audio Everywhere will cover the return shipping costs.

Delivery time

Right above the "Add to cart" button you'll see your personal delivery window — calculated automatically and continuously updated.

Shipping costs

• Germany: free shipping from €250
• EU-wide: free shipping from €350
• Switzerland, Norway, United Kingdom: free shipping from €1,000

Deliveries outside the EU

For deliveries outside the EU, German VAT is deducted from the displayed price — you pay the net price. Please note: additional costs may arise in the destination country, e.g. import duties, import taxes or local charges. These costs are beyond our control and are borne by the buyer.

Returns

Audio Everywhere offers a 14-day return policy. If the package arrives damaged, we cover the return shipping costs. For questions about returns, you can reach us by email, WhatsApp or phone — please include your order number.

For details on warranty and guarantee, please refer to the respective product description.

Taxes and pricing according to German VAT law (UStG)

Consumers in Germany and the EU

All prices include the applicable VAT according to § 1 para. 1 in conjunction with § 12 UStG. Taxation within the EU follows the One-Stop-Shop procedure under § 18j UStG. The VAT rate of the respective destination country applies.

Deliveries to third countries (outside the EU)

Deliveries outside the EU are VAT-exempt according to § 4 no. 1a UStG in conjunction with § 6 UStG. German VAT is deducted from the displayed price — you pay the net price. Please note: additional costs may arise in the destination country, in particular import duties, import taxes or local charges. These are beyond our control and are borne by the buyer.

Used products (margin scheme)

For used products we apply the margin scheme according to § 25a UStG. In this case, no VAT is shown.

B-stock

B-stock items do not fall under the margin scheme. Regular VAT applies to B-stock and is shown accordingly.

Safety information — Audio Everywhere

These notes apply to all HiFi devices and accessories sold by us.

Electronic devices (amplifiers, streamers, CD players, turntables)

Operate only in dry, enclosed indoor spaces. Avoid moisture, direct sunlight and extreme temperatures. Use only the specified mains voltage — do not overload power strips. Do not switch on devices with damaged cables or housings. Keep ventilation slots clear: at least 10 cm distance from walls and other devices. Place stably and securely — no open liquid containers nearby. Keep out of reach of children and pets.

Speakers

Place on a stable surface or suitable stands. No moisture, no direct sunlight. Operate only with matching amplifiers and correctly polarised cables. Do not use as a storage surface. Keep out of reach of children and pets.

Cables (speaker cables, RCA, power cables)

Use only for the intended purpose. Always pull by the plug, never by the cable. Avoid kinks, sharp edges and pressure from heavy objects. Replace visibly damaged cables immediately. Keep out of reach of children and pets.

Accessories (adapters, mounts, cleaning agents, styli, headshells)

Use only according to the manufacturer's instructions. No aggressive cleaning agents, no damp environments. Store small parts safely due to choking hazard. Mount accessories correctly to avoid damage or malfunction.

General notes

Read the operating instructions before use. No unauthorised repairs or opening of devices. Always contact a specialist service for technical problems. We are happy to answer any questions about safe use at any time.